Magnetic Separator Machine Types

Dry strong magnetic disc separator
Dry strong magnetic disc separator is widely used in sorting less than 2-3 mm weak magnetic minerals and rare metal ore selection again. It has a single disc (diameter φ = 900 mm) and double disc (φ = 576 mm) and three (φ = 600 millimeters) of three. Magnetic field strength up to 880-1440 kA / m. Among φ576 mm double disc used more often. Main part of the separator is a "mountain" shaped electromagnets and sensors rotatable disc suspension components. Disc like a saucer turned upside down with the tines of one of its diameter than the width of the ore belt of about sophomore disc using worm gear drive, adjustable pole electromagnet between the disc and handwheel distance (adjustment range 0-20) mm. To prevent clogging in the cylinder to the mine built with a weak magnetic field, can be pre-discharge to feed the strong magnetic minerals.
Flat ring strong magnetic separator
Construction features flat ring strong magnetic separator is the use of ring-chain debate closed magnetic circuit, copper wound coils, low voltage and high current excitation, heat cold water to cool the tooth plate for the separation medium. The aircraft from the device to the mine, ore concentrates and the flushing device, sorting swivels, magnetic system, then mining equipment, gear, DC power and other components. Magnetic system structure is novel. By the inner and outer concentric annular magnetic moment, radial core and coil. Spindle in the center of the ring closed magnetic circuit, no magnetic field lines pass. Coils of 22 × 15 × 2 mm square brass around the system, each of the outer turns of the core-coil 33, the coil core 66 in the turns, and against the pole. Using the water cooling coil cooling mode, a cooling effect, low cost, no noise, etc..